- Видео 1 674
- Просмотров 51 116 282
SketchUp
США
Добавлен 2 авг 2007
SketchUp users are architects, designers, builders, makers and engineers. They are the people who shape the physical world. They are important, and they deserve great tools because great tools produce great work.
At SketchUp, we do our best to make great tools for drawing. For our users, drawing is thinking. They draw to explore ideas, to figure things out, to show other people what they mean. They draw because they love it, and because nothing great was ever built that didn't start with a great drawing.
At SketchUp, we do our best to make great tools for drawing. For our users, drawing is thinking. They draw to explore ideas, to figure things out, to show other people what they mean. They draw because they love it, and because nothing great was ever built that didn't start with a great drawing.
The Data is in! 2023 vs 2024 Performance Test
Watch as Eric runs the same benchmark test in both versions 2023 and 2024 to compare the new New Graphics Engine vs the classic engine to see which is faster...and by how much. Well folks, the data in and the winner is...(watch to find out).
Want to run your own benchmark test? Get the example model here: forums.sketchup.com/t/benchmark-for-sketchup/115071
Want to learn more skills? Check out our SketchUp community forums: forums.sketchup.com , more videos on our RUclips channel: ruclips.net/user/SketchUp , or SketchUp Campus: learn.sketchup.com
Want to use SketchUp? View our different plans:
www.sketchup.com/plans-and-pricing
Read our blog for more learning content as well as industry insig...
Want to run your own benchmark test? Get the example model here: forums.sketchup.com/t/benchmark-for-sketchup/115071
Want to learn more skills? Check out our SketchUp community forums: forums.sketchup.com , more videos on our RUclips channel: ruclips.net/user/SketchUp , or SketchUp Campus: learn.sketchup.com
Want to use SketchUp? View our different plans:
www.sketchup.com/plans-and-pricing
Read our blog for more learning content as well as industry insig...
Просмотров: 2 249
Видео
Double Cut from mind-sight-studio
Просмотров 4,3 тыс.День назад
Check out Double-Cut on the Extension Warehouse today! extensions.sketchup.com/extension/6bc14ba6-bbc7-4590-a935-c22eee3d2e46/double-cut Want to learn more skills? Check out our SketchUp community forums: forums.sketchup.com , more videos on our RUclips channel: ruclips.net/user/SketchUp , or SketchUp Campus: learn.sketchup.com Want to use SketchUp? View our different plans: www.sketchup.com/pl...
Controversial Opinion: Groups are Temporary!
Просмотров 3 тыс.День назад
Groups are just for defining my "things," right? Well, yeah, that IS good, but there are cases where you might want to use groups to temporarily isolate geometry while modeling! Follow along as Aaron shows how he uses groups to temporarily set geometry to the side to make changes, then join it back together to geth the final model! Want to learn more skills? Check out our SketchUp community for...
Lock In to Master Inference Locking
Просмотров 4,2 тыс.2 дня назад
Lock In to Master Inference Locking
Unlock the Power of Inference Locking!
Просмотров 4,8 тыс.14 дней назад
Unlock the Power of Inference Locking!
Behind the Scenes: SketchUp 2024 Product Release Model
Просмотров 3,7 тыс.14 дней назад
Behind the Scenes: SketchUp 2024 Product Release Model
Easily Scan Spaces into SketchUp with Scan to Design
Просмотров 33 тыс.21 день назад
Easily Scan Spaces into SketchUp with Scan to Design
Ambient Occlusion INSIDE SketchUp [New in 2024]
Просмотров 7 тыс.Месяц назад
Ambient Occlusion INSIDE SketchUp [New in 2024]
How I Go from SketchUp to Digital Sketch (Photoshop, Wacom Cintiq)
Просмотров 5 тыс.Месяц назад
How I Go from SketchUp to Digital Sketch (Photoshop, Wacom Cintiq)
Help Eric Create His 2024 Scale Figure
Просмотров 7 тыс.Месяц назад
Help Eric Create His 2024 Scale Figure
Cleaning Up Architectural Scale Models for 3D Printing | Expert Tips #sketchup
Просмотров 4,2 тыс.Месяц назад
Cleaning Up Architectural Scale Models for 3D Printing | Expert Tips #sketchup
Open Cut List | SketchUp Woodworking Extension
Просмотров 10 тыс.Месяц назад
Open Cut List | SketchUp Woodworking Extension
Working with External References in LayOut
Просмотров 3,6 тыс.2 месяца назад
Working with External References in LayOut
What can you build with just one component?
Просмотров 5 тыс.2 месяца назад
What can you build with just one component?
Stitching Overlapping Terrain Meshes in SketchUp
Просмотров 3,3 тыс.2 месяца назад
Stitching Overlapping Terrain Meshes in SketchUp
Pushing the Limits of BEVEL by mind.sight.studios
Просмотров 3,8 тыс.2 месяца назад
Pushing the Limits of BEVEL by mind.sight.studios
Intersect with Model vs Solid Tools
Просмотров 3,7 тыс.2 месяца назад
Intersect with Model vs Solid Tools
Creating Immersive 360 Virtual Tours with V-Ray
Просмотров 4,3 тыс.2 месяца назад
Creating Immersive 360 Virtual Tours with V-Ray
Three Ways to Model From Images in SketchUp
Просмотров 9 тыс.2 месяца назад
Three Ways to Model From Images in SketchUp
Getting Around in SketchUp for Web
Просмотров 3,1 тыс.3 месяца назад
Getting Around in SketchUp for Web
Why are my materials TILING when I SCALE?
Просмотров 4,7 тыс.3 месяца назад
Why are my materials TILING when I SCALE?
The DANGERS of Orbiting Your LayOut Viewport
Просмотров 2,9 тыс.3 месяца назад
The DANGERS of Orbiting Your LayOut Viewport
when i import a dea file then sketchup gets heavy, is there a solution ?
I'm a newbie in May of 2024. I hope in later videos, you will go over what that "modifier key to copy" was at 7:08. Also, I've found that, after copying my box (did three) and go out of the command, when I try to select and resume the move command to make more copies, nothing happens.
Check out our fundamentals lessons - they'll cover all the essential tools and functions such as modifiers. But to shortcut the answer, its option/alt and that opens up additional functions per tool.
The audio feels crumpled.
Awesome, just what I needed for my curent model. Thank you!
Anyone notice the lag on box selection? So annoying. Everything else is smooth
This video begins with "We are on our 6th week of our architectural tips and tricks play list..." -- but then you don't supply a link for that playlist, and I couldn't find it on your main youtube page (not in the playlist section there) nor by doing searches. I've only found others in that playlist by hit and miss -- emphasis on the miss. It's a great series -- why not make it easy to find?
ruclips.net/p/PL-bndkJaV8A5xgcBgaQPIA6hIno2TsakZ
I thought SketchUp on iOS can only be used to view models
On the Viewer for iPhone, that is correct, but on iPad... that's a whole other world of possibilities!
Plug in name ?
😂😂😂😂😊😊😊😮😮😮
Thanks
I'm running SketchUp 2024 onan iMac with a magic Mouse. I find I don't need to worry about Left or Right clicking, inferences just happen.
For us slow kids in the back... Line tool > draw four lines, each parallel with the green & red axes (just a way to orient your eventual rectangle in the modeling space). Pull the square up to make a box, enter 8' to make it 8 feet tall (or whatever height you want). Use the select tool and select the top of the box. On a Mac w/ a Magic Mouse: Control click, then select Hide from the dropdown menu - the top of the box gets hidden. You can use Command Z to undo this. Now select Rotated Rectangle from your tool bar. Resume this video at 1:25. 4:49 I don't know what happened, but my protractor says the angle of my new plane is zero degrees. Oh well.
clean up ur table. my god , soo messy .
Hi Aron, i have suggestion for a video. I am practicing by drawing a car engine with most of the conponents. I think it is a good project to get good with sketchup. Because of all the tecniques needed to do it. But i can not see how to draw the timing belt with all the teeths on the strait parts and on the curved parts to match the pulleys. Can you give me a link at least if there is. Thank you, i love your way to explain. Keep going !
Hi Eric, what did you use to create the creepers at the corners of the cafe? Regards.
Hi. I modified the vines that came with this model from the 3DW - 3dwarehouse.sketchup.com/model/3c47c0a5559b1f9440a932c8e4de67d8/Garden-by-The-Bay-Supertrees?hl=en
@@SketchUp Thanks, Eric! Please keep up your great work. One learns a lot from the videos you guys produce.
Thanks Eric! Looks great. Looking forward to upgrading my computer and adding SU 24 so I can try this. Best, Steve
Thanks Eric! Looks great! Looking forward to upgrading my computer so I can try it out. Best, Steve
I notice many commenters (like me) have discovered through this video that they were (at least partially) crazy. Thank you for this contribution to keeping SketchUp users sane. Although here you say here to remain sane by tagging objects at the group level, for coloring objects you say the opposite: to color at the raw geometry level ("Paint What and Why"). So who's crazy?
All these great improvements yet still no Radius /Diameter Dimension tool in Layout 🤷♀
So i saw the same forum post and i think that its not misleading but not the full story. It appears to me that the new engine is slightly faster in the fps or video portion but the managing of geometry is slower. The video here orbits widely around the model but not through it and its not a heavy model already. FPS goes through the floor when dealing with heavy models (maybe worse than 23) and even just selecting heavy geometry (as in left click, mouse down to the right or in reverse - left click and up to the left) often pauses for me in the new engine to select raw geometry much less manipulating that geometry - which seems to be much slower. The new qt framework is a wrapper and in that way a middleman and when you have to convert into the wrapper, you lose time for the conversion but its much easier for the devs to maintain one codebase then coding natively to the hardware. Hopefully Trimble can speed up the managing of geometry or how the geometry gets managed portion of the code.
I tried Test.time_display on that 5 mil poly cafe scene with everything turned on, including Ambient Occlusion..you're right model level of detail affects the FPS result. For this 'heavy model', I'm still running at 68 fps with new graphics engine....vs 7.4 with the old graphics engine.
The box/cross selection is slow no matter how big the file is. Maybe my computer is throwing it out
Is it paid software on iPad
Yes it is
Fun fact, the Test.time_display thing can be done in any of your file. If you want to benchmark your own files, do it like he did, open in 22 or 23, test, open in 24 with similar parameters, test again. got some old big files to go from 7 to 30+ fps. it's a good code bit to have in your head when working, sometimes you feel sketchup is getting slower, like it's running in water. the test can immediately tell you if that's the case.
I still using an older version 21, but... I think if nothing added to SU2024 other than AO and GPU rendering it would be enough. Thanks Eric!
I want to see #Nicksonder s SketchUp model and document with ambiant occlusion
Yeah it is definitely faster
Components? Groups? I don't even use LAYERS.
Fron Android?
Im new to sketchup. I want to move a component 90 degrees to the green axis, but the component wont stop at the green axis, it will return to the original axis. I just want it to stop on the green so i can then move the component into place rather than have it return to original position. What to do to make component stop going back to original? I have trouble finding where component option to select 90 degrees which i think might solve this problem.
There is nothing in a standard component that woudl cause that to happen. It is possible you are dealign with a Dynamic Component or something, though... Probably best to post an example fo what youa re seeing on our forum (forums.sketchup.com)
I use SketchUp for precision modeling to be 3d printed. There's definitely an optimal way to model to avoid needing excessive supports. That porch for instance will need supports and you can section it out into pieces to make printing easier. Details will show up, but on something that small, it makes sense to exaggerate them if you print in one color and don't want to paint.
I resin print from Sketchup, would enjoy more content for 3D printing in all forms.
Sorrybwhat wasvthat around 2.30 U double clicked and all the other partsvdiapeared.? Then clicked out and they cane back?
Aaron has "Hide Rest of Model" turned on. This means when he enters a Group or Component, the rest of the model disappears. A lot of modelers set it to a keyboard shortcut to quickly switch back and forth between the two view modes. You can toggle it under View / Component Edit / Hide Rest of Model.
hola desde españa
thank god for this!
Thank you 😀😃😄😁
No problem 👍👍
Alguien sabe por que le hace esos dientes a cada pieza?
Where’s Part 1??🤷🏻♂️
ruclips.net/video/yJ5H8xZ7vdo/видео.html&ab_channel=SketchUp
Thank you! Plagued by failing skylight attempts. I now have diagnostic tools.
Super, super
With a Mac Magic Mouse, you hold down Control and click your mouse to Right Click.
Where did you manage to find these side images for modeling? I've been doing the same project but I am struggling so much with the legs/ramp proportions TAT
Ambient Occlusion does look sharp!!!!
Well dang it...walking the dog and today she was ready for a long trip, so I missed the whole LIVE-session 🥲 Oh well...happy dog is now sleeping on the couch and I can watch the SAVED version
Hey all! Part 2 is here: ruclips.net/video/AkrN_gLOBBQ/видео.html
Eric you are the best...
Sorry 35
36
Helped me a lot today! Thanks
So... imagine what that would do to the sun's path on the other side of your globe model. I'll wait... 🤦♀️
I like this video. One element about scenes that got me confused is that after making eight scenes--for elevations and four sections--I didn't have just the model to work on. I only had scenes. I guess that what I will try is to make a scene and deselect as many properties as I can, especially the camera location. On a related subject, I got into trouble with duplicative section cuts. Today, I learned about Outliner. I don't think dupes showed up in the Scenes panel. This seemed to be true whether or not the name varied. I did re-use the same symbol each time I reworked a scene. Maybe they will in Outliner. Question: When re-doing or updating a scene with a saved camera location, if the camera is deselected, would one would lose the original camera going forward or does it keep it because by deselecting, one is saying I don't want to change it? Thanks for listening, Aaron!